Bow Storage Bag for Inflatable Boats, Triangle, with D-Rings

Triangle Bow Bag for Inflatable Boats and Dinghies

Give your anchor and gear a home that is not the floor. This triangle bow bag hangs in the bow of your inflatable boat, above the floorboards, so the anchor, lines, and loose gear stay put and out from underfoot.

It comes ready to install, with four D-ring patches and a tube of PVC boat adhesive. Glue the D-rings inside the bow, clip on the straps, and pull them tight to hang the bag as high as you want.

Dinghy Bow Bag Features

• Triangle shape that fits the bow of an inflatable boat
• Hangs above the floorboards to keep gear off the floor and out of the way
• Holds an anchor, lines, and other equipment
• Four adjustable straps set how high the bag hangs
• 4 D-ring patches and PVC adhesive included

Fits Your Inflatable Sport Boat or Dinghy

One size fits every Island Hopper inflatable sport boat: Dolphin 8.8, Manta Ray 8.8, White Marlin 9.8, Shark 9.8, Killer Whale 10.8, and Swordfish 10.8. It also fits boats sold under the former Inflatable Sport Boats name. It installs in the bow of any PVC inflatable boat; compare the 20 x 13 x 16 in bag with the space in your bow before ordering.

• Size: 20 x 13 x 16 in
• Shape: triangle, for the bow
• Mounting: 4 straps to 4 glue-on D-rings
• Fits: all Island Hopper inflatable sport boats

How to Install a Bow Bag

1. With the boat inflated, choose and mark 4 spots inside the bow for the D-rings.
2. Deflate the boat.
3. Put a little glue on the back of each D-ring patch and press it onto the marked spot.
4. Let the patches dry for 3 hours.
5. Run the 4 straps from the bag through the D-rings. The tighter you pull them, the higher the bag hangs above the floorboards.

Comes ready to install immediately with:

•  1 Bow bag
•  4 D-rings 
•  1 tube of PVC boat adhesive

Click the link to contact us for more information on product.