assembling-island-hopper-water-trampoline

How to Assemble your Water Trampoline


Setting Up Your Water Trampoline

  1. Unbox the trampoline near the shoreline – Open the box close to where the trampoline will be installed.

  2. Lay out all tube and frame parts – Spread out the inflatable tube and all steel frame components.

  3. Position the jump surface inside the frame – Place the jumping mat inside the metal frame.

  4. Attach the springs – Connect all springs between the jumping mat and the frame.

  5. Buckle the frame to the inflatable tube – Secure the metal frame around the tube using the provided straps or buckles.

  6. Inflate the tube with the frame attached – Inflate the tube fully so it supports the frame and jump surface.

  7. Install safety pad and ladder – Attach the protective spring pad and the ladder.

  8. Anchor the trampoline – Secure the trampoline in the water using the appropriate anchor system before use. 

Removing & Storing

    1. Dry and fold the tube – Remove air and dry off your product, fold the tube in half, and roll it tightly.

    2. Wrap for storage – Secure with rope or straps and store in a dry, protected location. Store off the ground away from the reach of rodents. 

Back to blog